THOMAS ZIP 30 DA Gravity down feed bandsaw
One way miter cutting (from 0° to 60° right).
Two cutting speeds.
New hydraulic cylinder in aluminium.
Hydraulic regulator to control the sawframe down feed.
Blade rotation start switch with maintainded action on the sawframe grip.
Coolant liquid with electropump.
Pedestal in steel plate.
DA cutting cycle
The cutting operation, thanks to the DA device, is effected automatically through the sawframe downfeed at controlled speed by hydraulic regulator. At the end of the cut, blade motor and electropump for coolant liquid stop automatically. Sawframe rises manually. Manual vice opening and closing.
TECHNICAL FEATURES
Vice and sawframe in cast iron to provide high stability and vibration free cutting.
Precision blade guides with hard metal pads and adjustable bearings.
Bench and pedestal in steel plate.
Reduction unit with grears in oil-bath.
Anti-corrosion treatment with electrolytic nickel-plating and galvanization zinc plating ensure long lasting cutting precision.
Electric installation according CE regulations.
Control pannel setted on a fixed arm support.
Set of fuses against current overload.
Motor protected thermal feeler. Safety microswitch on the blade protection.
Severe tests on mechanical tolerances, electric installation and final performance test.
STANDARD EQUIPMENT
Set of service spanners.
Bar stop rod with millimiter scale.
Material support.
Bi-metal saw band 2450x27x0,9.
Certificate of conformity and instruction manual according to Machine Directive 2006/42/CE.
ACCESSORIES
Rollerway on loading side 2 mt
Rollerway on unloading side 2 mt with bar stop
3Ph Electric motor |
kW |
0.75 - 1.1 |
Electropump |
kW |
0.07 |
Gearbox reduction ratio |
I |
40/1 |
Flywheel diameter |
mm |
290 |
Blade dimension |
mm |
2450 x 27 x 0,9 |
Cutting speed |
m/1' |
32/64 |
Vice opening |
mm |
250 |
Sawframe inclination |
° |
40 |
Working height |
mm |
980 |
Machine dimension |
mm |
1400 x 750 x 1500 |
Weight |
kg |
230 |