Salvagnini PX
The PX natively combines productivity, with its automatic bending and handling cycles, and flexibility, with its universal bending tools.
The PX uses universal bending tools which automatically adapt in-cycle to the panel geometry, without machine down times or manual retooling, allowing batch-one or kit productions.
Safe technology
The panel bender is CE marked, to guarantee maximum safety for the operator. The loading and unloading operations are controlled by optical light barriers, which stop the cycle if necessary.
Intelligent configurability
The PX natively includes the CI interface, for integrating a loading/unloading robot on the left-hand side of the machine. To set it up, remove the side wall facing the robot by hand and then install it in the opposite wall for safety reasons.
Connectivity 4.0
The proprietary LINKS, STREAM and OPS softwares establish communication between the system and the company departments involved in the production flow.
Adaptive system
The integrated adaptive technologies (bending formula, MAC3.0) make the system intelligent and able to automatically adapt to changes in the material and the external environment, eliminating waste and corrections, and extending the range of products that can be made.
| Model | PX |
|---|---|
| Maximum length of incoming sheet (mm) | 2495 |
| Maximum width of incoming sheet (mm) | 1600 |
| Maximum diagonal that can be rotated (mm) | 2500 |
| Maximum bending length (mm) | 2180 |
| Maximum bending height (mm) | 203 |
| Maximum bending force (kN) | 330 |
| Maximum clamping force (kN) | 530 |
| Minimum thickness (mm) | 0.5 |
| Maximum thickness and bending angle (steel, UTS 410 N/mm²) | 2.5 (±90°), 1.6 (±120°), 1 (±125°) |
| Maximum thickness and bending angle (stainless steel, UTS 660 N/mm²) | 2.1 (±90°), 1.25 (±120°), 1 (±125°) |
| Maximum thickness and bending angle (aluminium, UTS 265 N/mm²) | 3.5 (±90°), 2.5 (±120°), 2.1 (±125°) |
| Average consumption (kW) | 5 |
| Noise level (Machine Directive 2006/42/EC) (dB) | 70 |