TRUMPF TruTool F 300
You can use the TruTool F 300 seam locker to work in sheet thicknesses of 0.03 - 0.05 in mild steel and lock straight as well as curved ducts.
For cost-effective work at the installation site
The TruTool F 300 is ideal for closing Pittsburgh seams on straight or curved ducts. You can work quickly with the quiet roll/glide process and achieve a tight connection. The sheet thickness range for this is 0.03 inches to 0.05 inches for mild steel. The adjustment to the sheet thickness is automatic.Flange height and sheet thickness
Suitable for flange heights of 9 mm – 13 mm and for sheet thicknesses of 0.75 mm – 1.25 mm.Excellent process reliability
Automatic adjustment to the sheet thickness gives you consistent seam results.Area of application
With the TruTool F 300, you can close seams on straight and curved ducts.| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² (minimum) | 0.75 mm |
| Maximum sheet thickness, steel 400 N/mm² (Maximum) | 1.25 mm |
| Flange height (B) | |
| Flange height (B) with sheet thickness 0.75 - 1.0 | 9 mm - 11 mm |
| Flange height (B) with sheet thickness > 1.0 - 1.25 | 11 mm - 13 mm |
| Radii | |
| Smallest inner radius (preformed) | 150 mm |
| Smallest outer radius | 300 mm |
| General | |
| Working speed (max.) | 7 m/min |
| Nominal power consumption | 550 W |
| Dimensions | |
| Length | 285 mm |
| Height | 358 mm |
| Weight | |
| Weight | 5.5 kg |