TRUMPF TruTool N 500

Area of application Nibbler
▪ Panel beaters, plumbers, tinsmiths
▪ HVAC technology, facade engineering, drywall construction
▪ Silo/container construction, tank demolition
▪ Electrical installations, cabinet construction, duct opening
▪ Suitable for the cutting of roofing profiles and C-L-U profiles

Powerful in four directions

The TruTool N 500 offers unique versatility. Since you can cut in four directions, even backwards, you can dismantle tanks and containers, and process coils and workpieces with bends of up to 90°. The machine is also well-suited to cutting high-tensile materials. The optimal weight/performance ratio of 8.8 lbs. against a sheet thickness of 0.2 in. is particularly impressive.

4 cutting directions

The machine can be turned through 360° in 4 steps of 90°. Rectangular punch with flexibility for profiles Ideal for work in hard-to-reach areas, for cuts across edges and weld seams.

Minimal force required

You work without feed force and, therefore, required force is reduced to a minimum.

Variable speed

The speed controller can be used to adjust the working speed to suit the specific cutting task.

Maximum sheet thicknesses
Maximum sheet thickness, steel 400 N/mm²	5 mm
Maximum sheet thickness, steel 600 N/mm²	3.2 mm
Maximum sheet thickness, steel 800 N/mm²	2.5 mm
Maximum sheet thickness, aluminium up to 250 N/mm²	7 mm
Radii
Smallest radius	90 mm
General
Working speed (max.)	1.5 m/min
Starting hole diameter	41 mm
Nominal power consumption	1700 W
Dimensions
Length	381 mm
Height	235 mm
Weight
Weight	3.8 kg