TRUMPF TruTool PN 200
The profiling nibbler with short tool is designed for profile depths of up to 3.35 in. You can adjust the direction of processing in 8 cutting directions.
Powerful and flexible for profiles, up to a depth of 3.4 inches
With its short tool, the TruTool PN 200 is specifically designed for trapezoidal sheets up to a profile depth of 3.4 inches and C-L-U profiles. Its performance is powerful enough for up to 0.08 inches in mild steel and 0.04 inches in stainless steel and it even cuts doubled sheets. You can also rotate the tool through 360° on the spot. The cutting direction, punch, and die carrier can be changed quickly, without the need for tools. You can choose from various tool depths to broaden the areas of application.Machine with short tool
For processing profile depths of up to 3.4 inches and C, L, and U profiles. It is also well-suited for corrugated sheet.Ideal for hard-to-reach places
You can easily adjust the working direction through 360 degrees, in steps of 45 degrees, without tools.Minimizes setup times
The punch and die carrier can be changed quickly without tools.Unbeatably fast
Fast and powerful with 7 feet per minute in 57,000 mild steel.| Maximum sheet thicknesses | |
| Maximum sheet thickness, steel 400 N/mm² | 2 mm |
| Maximum sheet thickness, steel 600 N/mm² | 1.5 mm |
| Maximum sheet thickness, steel 800 N/mm² | 1 mm |
| Maximum sheet thickness, aluminium up to 250 N/mm² | 3 mm |
| Radii | |
| Smallest radius | 50 mm |
| General | |
| Working speed (max.) | 2.1 m/min |
| Starting hole diameter | 24 mm |
| Nominal power consumption | 550 W |
| Dimensions | |
| Length | 267 mm |
| Height | 147 mm |
| Weight | |
| Weight | 1.8 kg |